Pedestrian Cable Protectors

CC-1 Light Duty


Light Duty Floor Cable Protectors are popular as a temporary solution to cover cables across open areas with light foot traffic.

The 17 x 9mm cavity can accommodate 2x 8mm outer diameter flex cables.

  • Ideal for areas with light foot traffic

  • Address a common cause of trips, tugs and falls
  • Can protect up to 2x 8mm diameter cables
  • Ribbed non-slip base, pre-split rear for ease of use
  • Flexible PVC - Supplied coiled in box; simply uncoil to lay flat
  • Fully safety tested and certified to BS EN 60670-1:2005


Dimensions
1.8m (L) x 60mm (W) x 12mm (H)
9m (L) x 60mm (W) x 12mm (H)

Inner channel
17mm (W) x 9mm (H)

FC68B Linkable


The heavier gauge design of Medium Duty Floor Cable Protectors addresses cable trip hazards… while providing effective protection for cables.

By minimising the risk of split insulation and damaged conductor strands, the danger of electrocution and hot spots (that create fire risks) is minimised also.

Lengths are available as 1.8m or 9m options, and supplied with friction-fit connector pins so that they can be joined to make continuous runs when necessary.

  • Ideal for areas with regular foot traffic
  • Protect cables, and address a common cause of trips and falls
  • 14mm x 9mm cavity
  • Ribbed non-slip base, pre-split rear for ease of use
  • Flexible PVC - Neat tapered design, lengths uncoil to lay flat
  • Fully safety tested and certified to BS EN 60670-1:2005

Dimensions
1.8m (L) x 68mm (W) x 14mm (H)
9m (L) x 68mm (W) x 14mm (H)

Inner channel
14mm (W) x 9mm (H)

FC83B Linkable


Medium Duty profiles uncoil to effectively lay flat across surfaces, while the tapered sloping sides are pedestrian-friendly. The pre-split back enables users to simply retro-fit the profile over the cables. Features combine so that cables can be contained within the cavity, with minimal risk of movement.

The unique connector pins provide an effective friction-fit connection that can be pushed-in, then later pulled apart, in adjoining lengths – to cover whatever length of cable is required. It is insufficient covering, say, only two-thirds of a trailing cable!

  • Ideal for areas with regular foot traffic
  • Protect cables, and address a common cause of trips and falls
  • 30mm x 10mm cavity
  • Ribbed non-slip base, pre-split rear for ease of use
  • Flexible PVC - Neat tapered design, lengths uncoil to lay flat
  • Fully safety tested and certified to BS EN 60670-1:2005

Dimensions
1.8m (L) x 83mm (W) x 14mm (H)
9m (L) x 83mm (W) x 14mm (H)

Inner channel
30mm (W) x 10mm (H)

FC83H Linkable


Ideal for up to 3x 8mm diameter cables, this versatile Cable Protector is supplied with connector pins so it can be cut to shorten, then reconnected or combined with other lengths to make longer runs.

The hazard stripe gives greater visibility to pedestrians.

Available in 1.8m lengths, or 9m length options.

Supplied with connector pins, so lengths can be joined to make longer runs.

  • Ideal for areas with regular foot traffic
  • Protect cables, and address a common cause of trips and falls
  • Prevent cable insulation damage/electrocution and risk of broken conductor strands­­
  • 30mm x 10mm cavity
  • Ribbed non-slip base, pre-split rear for ease of use
  • Flexible PVC - Neat tapered design, lengths uncoil to lay flat
  • No sharp kerb-effect, pedestrian friendly
  • Fully safety tested and certified to BS EN 60670-1:2005

Dimensions
1.8m (L) x 83mm (W) x 14mm (H)
9m (L) x 83mm (W) x 14mm (H)

Inner channel
30mm (W) x 10mm (H)

FC83B/2C/9M Linkable


Medium Duty 2-compartment Floor Cable Protectors are ideal if segregation is required between cable types; for example to separate mains voltage and low-voltage cables.

Same as all D-Line Medium Duty Cable Protectors, the rear is ribbed to minimise movement on smooth surfaces.

Both cavities offer 12 x 13mm inner capacity.

  • Ideal for areas with regular foot traffic
  • Protect cables, and address a common cause of trips and falls
  • Prevent cable insulation damage/electrocution and risk of broken conductor strands­­
  • 2 x 13mm x 12mm cavity
  • Ribbed non-slip base
  • Flexible PVC - Neat tapered design, lengths uncoil to lay flat
  • No sharp kerb-effect, pedestrian friendly
  • Fully safety tested and certified to BS EN 60670-1:2005



Dimensions
9m (L) x 83mm (W) x 15mm (H)

2x Inner channels
13mm (W) x 12mm (H)

CGS3B Cable Grip Strip


Cable Grip Strip is a neat and easy way to keep cables in place, and to eliminate risk of cables becoming a hazard.

Installers simply attach the Cable Grip Strip over cables. The 75mm wide x 3m long strip has hooks on rear which grip to closed-loop commercial carpet designs.

Ideal on floors under desks, or around floor perimeters, Cable Grip Strip is easy to cut and can be removed and reused as required – with no adhesive residue!

  • For under desks, and perimeter of carpeted office floors
  • Hook design on rear grips to commercial office carpets/carpet tiles
  • Easy to remove, reusable, no adhesive residue
  • Flat design, supplied coiled
  • Simply scissor cut to size then pinch cables and lay over cable length(s)
  • Not designed to protect cables from pedestrian traffic, but ideal to keep cables in position


Dimensions
3m (L) x 75mm (W)