Safe-D® T&E Grip Clips
Safe-D T&E Grip Clips are user-friendly by a symmetrical design that makes it easy to hold the clip over T&E cable during installation… keeping finger and thumb away from hammer.
Grip Clips include flat-head nails with 2.5mm diameter shafts that enable effective knock-in to mortar and wood; compared to alternative designs with thinner nails, the 2.5mm shaft minimises the risk of a nail bending or buckling in hard substrates.
- Produced from steel, fire-rated to 1200C+
- Flat-head nail sits tight when knocked-in
- 2.5mm diameter nail body, suitable for harder substrates
- User-friendly design for easy positioning
- keeping finger & thumb away from hammer - 4x sizes for popular T&E clips (1.5, 2.5,4.0, 6.0mm)
- Raised strip on clip-head prevents cable bruising if mis-hit!
- All nails have 2.5mm body dia, 5.5mm head dia & 25mm length
- Supplied in boxed quantity of 100 pcs
Dimensions
Grip Clip 1.5 - Holds 1x 1.5mm T&E cableGrip Clip 2.5 - Holds 1x 2.5mm T&E cable
Grip Clip 4.0 - Holds 1x 4.0mm T&E cable
Grip Clip 6.0 - Holds 1x 6.0mm T&E cable
2.5mm nail diameter
2.5mm nail diameter
2.5mm nail diameter
2.5mm nail diameter
Alternative Products
U-Clips
F-Clips
Conduit Saddles
Adjustable Clips
EV Cable Fixing Packs
Stag Clips
Spring Clip
Retro Clips
Steel Cable Ties
D-Fixings
Drill Bits
To provide assurance and peace of mind, all D-Line Safe-D® products have been certified by Exova Warringtonfire.
Tests confirmed that all products can hold cables secure in temperatures of 930ºC (+40 -0ºC) for 2 hours. Safe-D®
products also withstand required levels of shock, vibration and water spray. Copies of reports are available on request.
Tests confirmed that all products can hold cables secure in temperatures of 930ºC (+40 -0ºC) for 2 hours. Safe-D®
products also withstand required levels of shock, vibration and water spray. Copies of reports are available on request.
